| | Eng
HL119EP SmartLink HomePlug AV2 600Mbps with Pass Through
Description

The Aztech HL119E SmartLink HomePlug AV2 600Mbps with Pass Through embarks on a concept of No New Wires® data communications, and it transforms your in-house powerline into a networking infrastructure. It provides SmartLink Plus coupling to the Line-Neutral pair and the Line-Ground pair of the AC mains. It successfully reduce "dead spot", increase throughput and increase network coverage within a home. Surf the Internet and share data at the speed up to 1Gbps PHY rates through powerline, in any outdoor environment and rest assured with the best security from eavesdroppers through encryption on the power circuit.

HL119EP Smart Link HomePlug engine is a Qualcomm Atheros QCA7450 chipset and AR1540 AFE. It features faster processing power, Fast Ethernet host interfaces and an enhanced analog front end. The solution is compliance with IEEE1901 , Homeplug AV and Homeplug AV2, hence allowing hassle free compatibility with existing Homeplug AV devices and other suppliers of IEEE1901 PLC (Powerline Line Communication) devices.

Enhanced Quality of Service (QOS) also provides the guaranteed bandwidth reservations for multimedia payloads including TV over IP (IPTV), higher data rate broadband sharing, Online- Gaming, VoIP Calls, extending Wireless LANs coverage, Printer and peripheral sharing, Audio-Video transmission across the network as well as Network camera connectivity.

HL119EP provides a configuration push button for a convenient way of creating HomePlug network without the need to using the Device Utility from a computer. The security feature is supported by 128-bit AES Hardware encryption, ensuring the network communications is free from eavesdroppers and hackers.

Feature

Advance Green low-power modes

Integrated ARM CPU & Internal memory

Dynamic channel adaption and channel estimation

Windowed OFDM with noise mitigation based on patented line synchronization techniques improves data integrity in noise condition

Advanced Turbo Code Forward Error Correction

Integrated 10/100/1000 802.3az Ethernet PHY

Single Chip solution with integrated analog front end and line driver

Lower cost and power consumption than existing HPAV solutions for lower cost

Specification

Protocol/Standards

  • IEEE 1901/HomePlug AV/AV2 Compliant
  • Co- existence with HomePlug 1.0 Nodes
  • Compliant to EuP requirements
  • IEEE 802.3 10/100/1000 Ethernet (1Gbps)
  • IEEE 802.3az support

Data Transfer Rate

  • Up to 600Mbps over powerline

Modulation Support

  • Supports OFDM 4096/1024/256/64/16/8-QAM, QPSK, BPSK and ROBO Modulation Schemes

Frequency Band

  • 2MHz to 68MHz band

Quality of Service

  • Priority-based CSMA/CA channel access schemes maximize efficiency and throughput
  • Integrated Quality of Service (QoS) Enhancements
  • Hardware Packet Classifiers for ToS, CoS and IP Port Number
  • Supports IGMP managed multicast session

Diagnostic and Management Interface

  • Homeplug AV generic and vendor specific Management Message Entries (MME)

Security Support

  • 128-bit AES Link Encryption with key management

Memory

  • SPI Flash : 2 MB

Hardware

  • Qualcomm Atheros QCA7450 chipset (1pc)
  • Qualcomm Atheros AR1540 chipset (1pc)

Platform Support

  • OS Independent with TCP/IP protocol installed

Power Supply

  • Switch Mode 85VAC to 265VAC Supply for UK/US 3-pin plugs

Physical Specifications

 

LED Indicators

  • 1 x Power LED (Green color)
  • 1 x Powerline Link/Activity Status LED (Bicolor)
  • 1 x Ethernet Link/Activity Status LED (Bicolor)

External Connectors

  • 1 x Electrical Power plugs
  • 1 x RJ45 for 10/100/1000 Ethernet

Push Button/Switch

  • 1 x Simple Connect Push Button (Set up network password automatically)
  • 1 x Factory Default Reset Button

Resin/Plastic Casing

  • Polycarbonate, FR rating UL94-V0

Dimension

  • 116(H) x 62(W) x 42(D) mm

Weight

  • 210g

Power Consumption

  • 4.5W

Platform Support

  • Windows 98SE, 2000, ME, XP 32bit, Vista 32bit, Windows 7 (32/64-bit),Windows 8

Environmental

Temperature

  • Operating : 0° to 40° Celsius; 32° to 104° Fahrenheit
  • Non-Operating : -25° to 70°; Celsius -13° to 158° Fahrenheit

Humidity

  • Operating : 30% to 80% Relative Humidity (Non-Condensing)
  • Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)
Address: Rm2, 20/F Kowloon Plaza, 485 Castle Peak Rd, Lai Chi Kok, Kowloon, HK
Tel:(852) 29596226
Fax:(852) 29596227